Metal Flange - the professional expansion joint manufacturer in China

Home|Sitemap|Customers|Industries & Applications

Metal Expansion Joints

Fabric Expansion Joints

Rectangular Metal Expansion Joints

Precision Bellows

Metal Flange

Expansion Joints For Ship Marine

Expansion Joints For Diesel Engine

Expansion Joints For High Voltage Apparatus

Info Structrue Chart Operative Norm Production Process Photo Gallary

Metal Flanges

When optimal product longevity is desired our metal flange is the product to choose. Made from galvanized metal this flange may be used in both standard and custom configurations. Our uniquely capable metal flange is available in two standard sizes. The small size metal flange and our large size metal flange. Should you have a special size or product design requirement don't hesitate to let us know and we will custom fabricate a metal flange according to your particular specifications.

1) Lap Joint Flanges

The lap joint flange is practically identical to a slip-on flange except it has a radius at the intersection of the bore and flange face. This radius is necessary to have the flange accommodate a lap joint stud end.

2) Blind Flanges

The blind flanges is a flange without a bore, It is used to close off the end of a piping system and/or pressure vessel opening. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened.

3) Socket Welding Flanges

The socket welding flange is similar to a slip-on flange except it has a bore and a counter bore dimension.
The counter bore is slightly larger than the O.D. of the matching pipe, allowing the pipe to be inserted into the flange similar to a slip-on flange. The diameter of the smaller bore is the same as the I.D. of the matching pipe a restriction is built into the bottom of the bore which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket welding flange.

4) Welding Neck Flanges

The welding neck flange is normally referred to as the "high up" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The welding neck flange is the best designed butt-welded flange of those currently available because of its inherent structural value.
It is expensive because of the design.

5) Threaded(Screwed) Flanges

The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that It can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures, and in highly explosive areas where welding create a hazard.

6) Slip-On Flanges

The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide sufficient strength and prevent leakage. Slip-on flanges are all bored slightly larger than the O.D. of the matching pipe. They are preferred over welding neck flanges by many users buy to their lower initial cost, but final installation cost is probably not much less than that of the welding neck flange because of the additional welding involved.

Characteristics
Characteristics
Material	Carbon Steel;SS304;SS321;SS316
Dimension	DN10—DN4800
Pressure	0.25Mpa—25Mpa
Production Method	Forging